Maintenance and use of rubber hose

Maintenance and use of rubber hose
1. Use rubber hoses correctly
 
It is very important to determine the length of the rubber hose you need. At the same time, you should also check whether the usage conditions of the rubber hose meet the requirements of the selected hose. You should make sure that the rubber tubing you will use is the most suitable. The working pressure and suction value should be carefully determined. In particular, it should be noted that sudden pressure changes or pressure peaks exceeding the allowable maximum value will greatly shorten the life of the rubber tube. Both ends of the rubber tube cannot be continuously immersed in the conveyed material.
2. Install the rubber hose for use

If you install the rubber tube to make its bending radius smaller than the minimum value specified, the service life of the rubber tube will be greatly shortened. Therefore, before installation, it is recommended that you consult on the use information, especially the information on the bending radius of the rubber tube.

3. Maintenance of rubber hose

Cleaning: After use, it is recommended that you empty the hose. If necessary, it should be cleaned. Inspection: The rubber tube must be inspected after each use to ensure that there is no structural damage. Pressure: If the rubber tube is under severe pressure during use or the outer layer of the rubber tube will be in contact with the conveyed liquid for a long time, a hydraulic test is recommended.
If you are interested in rubber hose,You can browse related products and initiate consultations on our website.

Find the right hydraulic solution support?